The ultrasonic scalpel shafts of energy surgical instruments are made of Ti-6Al-4V Eli alloy, commonly available in sizes Ф4.8mm, Ф5.0mm, Ф5.5mm, Ф6.0mm, Ф8.0mm, Ф10.0mm, Ф12.0mm, Ф14.0mm, and Ф16.0mm.

Our titanium bars and wires have stable raw materials, ensuring consistent tensile properties, macrostructure, microstructure, and ultrasonic inspection results. This ensures that all performance indicators meet the standards and customer requirements, guaranteeing product consistency.

The application of titanium alloys in surgical staplers not only improves the reliability and durability of the instruments but also significantly enhances surgical outcomes and patient recovery. Therefore, they are widely used in modern surgical procedures.

The titanium staples in the surgical stapler are made of Gr1, Gr2, and Gr3 titanium wire, with common sizes of Ф0.21mm, Ф0.22mm, and Ф0.23mm. The material and quality of the titanium staples are crucial to the effectiveness and safety of the surgery.

Orthopedic implants in artificial joints (hip, knee, ankle, shoulder, elbow, wrist, finger joints, etc.) made of Ti-6Al-4V, Ti-6Al-4V Eli alloy, commonly used sizes of Ф17.2mm, Ф18.0mm, Ф55.0mm, Ф60.0mm, Ф80.0mm. Orthopedic implants in the bone trauma products (screws, plates, intramedullary nails) made of Gr1, Gr2, Gr3, Gr5 (Ti-6Al-4V) Gr23 (Ti-6Al-4V ELI), commonly used sizes of Ф5.0, Ф6.0, Ф6.0, Ф6.0 (Ti-6Al-4V ELI). Gr2,Gr3,Gr5(Ti-6Al-4V) Gr23(Ti-6Al-4V ELI), commonly used size Ф5.0, Ф6.0, Ф8.0mm, Ф3.0mm, Ф10.0, Ф12.0mm, Ф14.0mm, Ф15.0mm, Ф16.0mm, Ф16.5mm, Ф17.0mm, Ф18.0mm. 18.0mm. Orthopedic implants in the spinal internal fixation system Gr5 (Ti-6Al-4V) Gr23 (Ti-6Al-4V ELI) made of commonly used size Ф5.0mm, Ф6.0mm, Ф3.8mm, Ф10.0mm, Ф13.0~φ15.5mm.

Our titanium rods and wires have stable raw materials that ensure consistent tensile properties, macro-structure, micro-structure and ultrasonic test results. This ensures that all performance indicators are in line with standards and customer requirements, guaranteeing consistent products.

Dental implants made from GR4, commonly used size Ф4.0mm, Ф5.0mm, Ф6.0mm, Ф8.0mm, Ф12.0mm. Dental abutment, fixation nails made from Ti-6Al-4V, Ti-6Al-4V Eli alloy, commonly used size Ф3.0mm, Ф4.0mm, Ф5.0mm, Ф6.0mm, Ф10.0mm. Dental bridge materials using titanium discs, commonly used specifications Ф98 * 12, Ф98 * 14, Ф98 * 16, Ф98 * 18, Ф98 * 20mm.

Our titanium rods, wires and disks have a stable raw material that ensures consistent tensile properties, macrostructure, microstructure and ultrasonic test results. This ensures that all performance indicators meet standards and customer requirements, guaranteeing consistent products.

Titanium alloys are widely used in aerospace because of their great strength-to-weight ratio, corrosion resistance and high-temperature properties.
Ti-6Al-4V (Grade 5) is commonly used in aerospace for aircraft structural and engine components, Ti-6Al-2Sn-4Zr-2Mo (Grade 6) is used for turbine engine components, and Ti-10V-2Fe-3Al is used for aircraft structural components and fasteners.

Titanium alloys are widely used in the petrochemical industry for their good corrosion resistance, high strength and high-temperature resistance.
GR1 is used in reactors and pressure vessels, GR2
used in pumps and valves, GR7 titanium alloy is used in heat exchangers and piping systems for desalination equipment, GR12 titanium alloy is used in chemical reactors, and GR5 titanium alloy (Ti-6Al-4V) is used in drilling equipment and downhole tools.

Titanium alloys are increasingly used in 3D printing, especially in high-tech fields such as aerospace, medical and automotive industries.
Ti-6Al-4V ELI (Grade 23) is used for maxillofacial bone implants, Ti-6Al-4V (Grade 5) is used for aircraft structural components, Ti-6Al-4V (Grade 5) is used for turbine blades, Ti-6Al-2Sn-4Zr-2Mo (Grade 6) is used for turbine engine components, Ti-6Al-4V (Grade 5) for race car engine components, and Gr7 (Grade 7) for heat exchangers and piping systems in desalination equipment.

Titanium alloys are increasingly used in the automotive industry, and their great properties have led to their widespread use in high-performance and special-purpose automotive components.
Ti-6Al-4V ELI (Grade 23) is generally used in automotive engine components for the manufacture of piston rods, valves and connecting rods in the engine to improve engine performance and fuel efficiency.Ti-6Al-4V (Grade 5) is used in automotive exhaust systems, suspension systems, braking systems, body structures, connectors and fasteners.

Ship industry in the hull of the key structural components, reinforcing parts with Ti-6Al-4V (Grade 5); marine platforms in the support structure and connectors used in the titanium alloy grade is: Ti-6Al-4V ELI (Grade 23); propulsion system in the propeller, propeller used in the titanium alloy grade is Ti-6Al-4V (Grade 5); piping system on board the ship's The grade of titanium alloy used in pipeline system is Ti-3Al-2.5V for pipelines and valves on ships; the grade of titanium alloy used in various equipments and fittings (e.g. fasteners, brackets, etc.) in ship equipments is Ti-6Al-4V (Grade 5).